TiWi-R2 TRANSCEIVER MODULE
DATASHEET
CLEANING
In general, cleaning populated modules is
strongly discouraged. Residuals under the
module cannot be easily removed with any
cleaning process.
SHIPPING, HANDLING, AND STORAGE
Shipping
TiWi-R2 modules are delivered in trays of 100
or reels of 1,000.
?
?
?
Cleaning with water can lead to capillary
effects where water is absorbed into the gap
between the host board and the module.
The combination of soldering flux residuals
and encapsulated water could lead to short
circuits between neighboring pads. Water
could also damage any stickers or labels.
Cleaning with alcohol or a similar organic
solvent will likely flood soldering flux
residuals into the RF shield, which is not
accessible for post-washing inspection. The
solvent could also damage any stickers or
labels.
Ultrasonic cleaning could damage the
module permanently.
Handling
The TiWi-R2 modules contain a highly sensitive
electronic circuitry. Handling without proper
ESD protection may damage the module
permanently.
Moisture Sensitivity Level (MSL)
Per J-STD-020, devices rated as MSL 4 and
not stored in a sealed bag with desiccant pack
should be baked prior to use.
After opening packaging, devices that will be
subjected to reflow must be mounted within 72
OPTICAL INSPECTION
After soldering the Module to the host board,
consider optical inspection to check the
following:
hours of factory conditions (<30°C and 60%
RH) or stored at <10% RH.
Bake devices for 48 hours at 125°C.
Storage
?
?
?
Proper alignment and centering of the
module over the pads.
Proper solder joints on all pads.
Excessive solder or contacts to neighboring
pads or vias.
Please use this product within 6 months after
receipt. Any product used after 6 months of
receipt needs to have solderability confirmed
before use.
The product shall be stored without opening the
REWORK
The module can be unsoldered from the host
board if the Moisture Sensitivity Level (MSL)
requirements are met as described in this
datasheet.
Never attempt rework on the module
itself, e.g., replacing individual
packing under the ambient temperature from 5 to
35deg.C and humidity from 20 to 70%RH.
(Packing materials, in particular, may be
deformed at the temperatures above this range.)
Do not store in salty air or in an environment
with a high concentration of corrosive gas, such
as Cl2, H2S, NH3, SO2, or NOX.
Do not store in direct sunlight.
components.
Such actions will
The product should not be subject to excessive
terminate warranty coverage.
mechanical shock.
The information in this document is subject to change without notice.
330-0045-R4.0
Copyright ? 2010-2012 LS Research, LLC
Page 27 of 41
相关PDF资料
450-0085 COM6L-T5 ADAPTER CARD WITH U.FL
450-0089 EVAL MODULE TIWI-SL
4515-DS5A020DP SENSOR DIFF PRESS 20H20 8DIP PCB
4515DO-DS5AI020DP SENSOR DIFF PRESS 20H20 8DIP PCB
4525-DS5A001DP SENSOR DIFF PRESS 1PSI 8DIP PCB
4525DO-DS5AI030DP SENSOR DIFF PRESS 30PSI 8DIP PCB
456 LAMP INCAND G4-1/2 MINI BAYONET
459 LAMP INCAND 5MM MIDG FLANGE 22V
相关代理商/技术参数
450-0037R 功能描述:WiFi/802.11模块 TiWi-R2 Module, U.FL Conn, Tape and Reel RoHS:否 制造商:Taiyo Yuden 支持协议:802.11 b/g/n 频带: 数据速率:150 Mbps 接口类型:SDIO 传输功率(最大): 天线连接器类型: 工作电源电压:3.4 V to 5.5 V 传输供电电流: 接收供电电流: 最大工作温度:+ 80 C 尺寸:35 mm x 15 mm x 2.9 mm
450-003A 制造商:LG Corporation 功能描述:ADAPTER ANT (75/300) *CONTAINE
450-003B 制造商:LG Corporation 功能描述:ADAPTOR ANT
45-0003-BK 制造商:DATACOMM ELECTRONICS 功能描述:CABLE PASS THROUGH WALL PLATE RECESSED IN WALL LT BLACK
45-0003-WH 制造商:DATACOMM ELECTRONICS 功能描述:CABLE PASS THROUGH WALL PLATE RECESSED IN WALL WHITE
450004083880002 功能描述:工业移动感应器和位置传感器 RESISTIVE & OPTICAL RoHS:否 制造商:Honeywell 输出类型:Analog - Current 电压额定值:12 VDC to 30 VDC 线性:+/- 0.0011 % 温度范围:- 40 C to + 85 C 总电阻: 容差: 类型:Rotary Sensor
450-0047 功能描述:Zigbee/802.15.4模块 SiFLEX02-HP U.fl Module RoHS:否 制造商:Digi International 频带:902 MHz to 928 MHz 视线范围: 数据速率: 灵敏度: 工作电源电压:2.4 V to 3.6 V 传输供电电流:215 mA 接收供电电流:26 mA 输出功率:250 mW 天线连接器类型:Wire 最大工作温度:+ 85 C 尺寸:32.94 mm x 22 mm x 2.03 mm
450-0049 功能描述:Zigbee/802.15.4模块 SiFLEX02-HP RF Castellation Module, RoHS RoHS:否 制造商:Digi International 频带:902 MHz to 928 MHz 视线范围: 数据速率: 灵敏度: 工作电源电压:2.4 V to 3.6 V 传输供电电流:215 mA 接收供电电流:26 mA 输出功率:250 mW 天线连接器类型:Wire 最大工作温度:+ 85 C 尺寸:32.94 mm x 22 mm x 2.03 mm